Product ID:AMBERLITE-R IRA-938 RESIN, 69436
MSDS Date:10/11/1991
FSC:8030
NIIN:00N003405
MSDS Number: BXWRM

ROHM & HAAS CO

INDEPENDENCE MALL WEST
PHILADELPHIA, PA 19105
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 215-592-3000

Cage: GO264

ROHM AND HAAS CO

PHILADELPHIA, PA 19106-2399 US

Telephone: 215-592-2521/215-592-3000

Cage: 77902

STYRENE COPOLYMER, CL ION FORM)

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

32F;0C. VAP

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 70-80%

OSHA PEL N/K

ACGIH TLV: N/K

BUILD-UP OF PRESS & POSS EXPLO. CONSULT SOURCE

RTECS: 9999999ZZ

DO NOT PACK COLUMN W/DRY ION EXCHANGE RESINS. DRY

RTECS: 9999999ZZ

COLUMNS TO SHATTER.

RTECS: 9999999ZZ

MANUAL OF RECOMMENDED PRACTICE PUBLISHED BY AMERICAN

RTECS: 9999999ZZ

ON DESIGN, INSTALLATION, USE, & MAINTENANCE OF

RTECS: 9999999ZZ

BENZENEMETHANAMINIUM AR-ETHENYL-N,N,N- TRIMETHYLCHLORIDE

CAS: 60177-39-1

Fraction By Weight: 20-30%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE CONTACT: MATERIAL CAN CAUSE
IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST: CALL MD IMMEDIATELY . INHAL: REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE OXYGEN/ARTIFICIAL RESPIRATION) . SKIN:
FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD . EYES: FLUSH EYES WITH
A LARGE AMOUNT OF WATER FOR AT LEAST 15 MINUTES. CONSULT MD IF
IRRITATION PERSISTS.

Extinguishing Media:USE THE FOLLOWING EXTING MEDIA WHEN FIGHTING FIRES
INVOLVING THIS MATERIAL: CARBON DIOXIDE, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:COMBUSTION GENERATES TOXIC FUMES OF THE
FOLLOWING: NITROGEN OXIDES, HYDROGEN CHLORIDE.

Spill Release Procedures:WEAR GLOVES MADE OF COTTON OR CANVAS, SAFETY
GLASSES (ANSI Z87.1 OR APPROVED EQUIVALENT). FLOOR MAY BE SLIPPERY;
USE CARE TO AVOID FALLING. TRANSFER SPILLED MATERIAL TO SUITABLE
CONTAINERS FOR RECOVER Y OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:MIN RECOM STORAGE TEMP FOR THIS MATL
IS 0C/32F. MAX RECOM STORAGE TEMP FOR THIS MATL IS 60C/140F. KEEP
FROM FREEZING; MATL STABILITY MAY BE AFFECTED.
Other Precautions:MAX RECOM OPERATING TEMP IS 77C/170F. PROPERLY
DESIGNED EQUIP IS VITAL IF THESE ION EXCHANGE RESINS ARE USED IN
CONJUNCTION W/STRONG OXIDIZING AGENTS SUCH AS NITRIC ACID TO PVNT
RAPID BUILD-UP OF PRES S & POSS EXPLOS. CONSULT SOURCE (SUPDAT)

Respiratory Protection:USE NIOSH/MSHA APPRVD RESP APPROP FOR EXPOS OF
CONCERN . RESP PROT PROGRAM MEETING OSHA 1910.134 & ANSI Z88.2 REQS
MUST BE FOLLOWED WHENEVER WORKPLACE CONDITIONS WARRANT A RESP'S
USE. NONE REQD UNDER NORMAL OPERATING CONDITIONS.
Ventilation:VENT SYS EMPLOYED IS DEPENDENT ON USER'S SPECIFIC APPLICATN
OF MATL. REFER TO CURRENT ED OF INDUS VENT:A MANUAL (SUPDAT)
Protective Gloves:COTTON OR CANVAS.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:FACILITIES STORING OR UTILIZING THIS
MATERIAL SHOULD BE EQUIPPED WITH AN EYEWASH FACILITY.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH:7-9 AQ SLURRY. OTHER PRECS: KNOWLEDGEABLE IN HNDLG OF MATLS BEFORE
PROCEEDING. DO NOT PACK COLUMN W/DRY ION EXHANGE RESINS. DRY BEADS
EXPAND WHEN WETTED; EXPANSION CAN CAUSE GLASS COLUMNS TO SHATTE R.
VENT:OF REC PRACT BY ACGIH FOR DESIGN, INSTALLATION, USE & MAINT OF
EXHST SYS. NONE REQD UNDER NORM OPERATING CNDTNS.

Boiling Pt:B.P. Text:SEE ING 3
Melt/Freeze Pt:M.P/F.P Text:SEE ING 3
Vapor Pres:SEE ING 3
Vapor Density:SEE ING 3
Spec Gravity:1.07 (H*2O=1)
pH:SUPDAT
Evaporation Rate & Reference:SEE ING 3
Solubility in Water:PRACTICALLY INSOL
Appearance and Odor:TAN BEADS; AMINE ODOR.
Percent Volatiles by Volume:ING 3

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS, PARTICULARLY CONCENTRATED
NITRIC ACID.
Stability Condition to Avoid:AVOID TEMPERATURES ABOVE 200C/392F.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD THE
FOLLOWING: MONOMER VAPORS, OXIDES OF NITROGEN, ALKYLAMINES,
HYDROGEN CHLORIDE.

Waste Disposal Methods:UNUSED RESIN MAY BE INCINERATED OR LANDFILLED IN
FACILITIES MEETING LOCAL, STATE AND FEDERAL REGULATIONS. FOR
CONTAMINATED RESIN, THE USER MUST DETERMINE THE HAZARD AND USE AN
APPROPRIATE DISPOSAL MET HOD.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.